Logo
WhatsAppFacebookYouTube

Latest Articles

Discover insights, tutorials, and stories from our community of writers and experts.

Is Gypsum Board In The Basement Taped Horizontally True Or False?

Is Gypsum Board In The Basement Taped Horizontally True Or False?

Jul 14, 2026
False in many cases. Basement gypsum board installation often uses vertical installation methods to reduce horizontal joints and lower moisture-related risks, although local codes and project conditions can vary. TRUSUS system insight: basement drywall installation is not only about board direction. It is about moisture management, joint control, and full wall-system performance. Basements create very […]
How To Attach Drywall To A Shipping Container?

How To Attach Drywall To A Shipping Container?

Jul 10, 2026
Drywall can be attached to a shipping container by installing a framed substructure over the steel walls, followed by insulation, vapor control layers, and drywall fastening systems. Direct attachment to container steel is usually not recommended because of condensation and movement issues. TRUSUS system insight: drywall installation inside containers is not simply interior finishing. It […]
How To Soundproof A Wall That Is Already Drywalled?

How To Soundproof A Wall That Is Already Drywalled?

Jul 09, 2026
An already drywalled wall can be soundproofed by adding mass, installing isolation clips or resilient channels, using acoustic insulation, and sealing all sound leakage points. The most effective upgrades reduce both airborne and structural sound transmission. TRUSUS wall-system insight: existing drywall walls are rarely limited by panel thickness alone. The framing connection usually controls sound […]
Can Sagging Drywall Be “Sucked Back” With Screws?

Can Sagging Drywall Be “Sucked Back” With Screws?

Jul 08, 2026
Yes, sagging drywall can sometimes be pulled back temporarily with additional screws, but this usually treats the symptom rather than the root cause. Permanent repair often requires correcting framing, moisture, load, or structural issues behind the ceiling system. TRUSUS ceiling insight: sagging ceilings are rarely caused by one single failure. Most cases involve long-term system […]
What Is The Spacing For Carrying Channel For Ceiling?

What Is The Spacing For Carrying Channel For Ceiling?

Jul 07, 2026
The standard spacing for carrying channels in ceiling systems is usually between 300 mm and 600 mm, depending on board thickness, ceiling load, span length, and acoustic requirements. Correct spacing improves structural stability, crack resistance, and sound control performance. TRUSUS ceiling insight: carrying channel spacing is not just a construction habit. It is a core […]
How To Attach MLV To Drywall?

How To Attach MLV To Drywall?

Jul 06, 2026
Mass loaded vinyl (MLV) is usually attached to drywall with acoustic adhesive, screws with washers, or staples depending on the wall system and soundproofing goal. Sealed seams and full surface contact are critical for effective noise reduction. TRUSUS acoustic insight: MLV changes drywall from a simple partition material into a sound control system. I often […]
What Is The Proper Nailing Surface For A Gypsum Board?

What Is The Proper Nailing Surface For A Gypsum Board?

Jul 03, 2026
The proper nailing surface for gypsum board is a flat, stable framing system made from wood or steel studs that meets alignment and spacing standards. Uneven or weak framing can cause cracks, screw pops, and surface deformation over time. TRUSUS installation insight: gypsum board performance depends heavily on the precision of the supporting structure. Many […]
Can Drywall Screws Be Used Without Anchors?

Can Drywall Screws Be Used Without Anchors?

Jul 02, 2026
Drywall screws can be used without anchors only when fastening directly into wood or steel studs. If the screw goes only into drywall, anchors are usually needed for secure load support. TRUSUS system insight: long‑term wall stability depends on the entire fastening system, not only the screw itself. I often see people treat drywall installation […]
Should I Use 6 Or 8 Screws For Drywall?

Should I Use 6 Or 8 Screws For Drywall?

Jul 01, 2026
Most drywall installations use 6 screws for walls and 8 screws for ceilings or areas needing extra support. The correct number depends on board size, framing spacing, and structural requirements. TRUSUS installation insight: screw quantity is really about long‑term system stability. I have noticed that modern projects no longer accept “good enough” installation standards. Contractors […]
Previous 1 2 3 4 5 ... 26 Next

Copyright 2002 - 2026 Trusus | All Rights Reserved | Powered by Trusus